On-line shop
English | Deutsch | Polska | Русский | 中文 | العربية | Português | Français | 日本語 | Norsk | Svenska | فارسی | Türkçe | Español | italiano
MainProductsDownloadsSupportFAQSupport of Sat ProvidersOperating RulesDrivers Prof 6200Drivers Prof 1100Drivers Prof 7300Drivers Prof 7301Drivers Prof 7500Prof IP DATADescription of IP DATAIP DATA StatisticsInstallation IP DATAManual Installation MPEMAC-Address of MPEWindows SettingsInstallation DVBViewerInstallation DVBDreamInstallation AltDVBInstallation ProgDVB 6Installation ProgDVB 4Installation MediaPortalInstallation MyTheatreInstallation BlazeVideoInstallation SkyNetInstallation MannaTroubleshootingHardware Decoder h.264ReviewsWhere to BuyLegal DocumentsProduct RegistrationAbout PTGContacts


Operating Rules of DVB-Card

For PCI-card

1. Computer case should be ground (according to the electrical safety regulations).
2. Commutation (connection/ disconnection of DVB-card to the cable) of the antenna cable should be done when a computer is totally cut off (network cable of a computer power unit should be disconnected from the socket).

For USB-card and stationary computer

1. Computer case should be ground (according to the electrical safety regulations).
2. Commutation (connection/ disconnection of DVB-card to the cable) of the antenna cable and USB-cable (connection/ disconnection to USB-outlet) should be done when a computer and USB-card are totally cut off (network cable of a computer power unit and a plug of card power unit should be disconnected from the socket).
2.1 Connection/ disconnection of USB-card should be done by connecting/ disconnecting a plug of a card power unit to the socket.

For USB-card and lap-top

1. Commutation (connection/ disconnection of DVB-card to the cable and of cable to devices) of the antenna cable and USB-cable (connection/ disconnection to USB-outlet) should be done when a laptop and USB-card are totally cut off (network cable of a laptop power unit and a plug of a card power unit should be disconnected from the socket).
1.1. Connection/ disconnection of USB-card should be done by connecting/ disconnecting a plug of a card power unit to the socket.
The case when DVB-card is out of a breakdown because of the device operational rules violation is not a guarantee event and DVB-card is not subject to change.

See also Question 16 in FAQ section.

© 2004-2010 Prof Tuners Group